|
|
DynaBolt Sleeve Anchors
Product Advantages
| > |
Through fixing - no marking out and repositioning |
| > |
Variety of head styles |
| > |
Unique sleeve design collapses during tightening to provide pull-down onto fixture |
| > |
Integral nut and washer |
| > |
Finished head anchors, bolt can be easily removed |
Applications
| > |
Timber to concrete, formwork, battens, bottom plates |
| > |
Services - Ductwork, pipe brackets, cable trays, suspended ceilings |
| > |
Metalwork - Signs, handrails, gates, drying rack (HKHA) |
| > |
Light to medium duty loading |
| > |
Drill correct diameter hole and depth. |
| > |
Remove debris from hole by blowing out with compressed air or hand held blow out pump. |
| > |
Insert anchor through fixture and tap in until washer contacts fixture. |
| > |
Tighten bolt with a torque wrench to recommended tightening torque. |
Product Range
| |
Type |
Sizes |
 |
Hex Nut - Zinc Plated |
ø6 (M4.5) to ø20 (M16) |
 |
Hex Bolt - Zinc Plated |
ø8 (M6) to ø16 (M12) |
 |
Countersunk Head - Zinc Plated |
ø6 (M4.5) to ø10 (M8) |
 |
Round Head - Zinc Plated |
ø6 (M4.5) |
 |
Hex Nut - Hot Dip Galvanized |
ø10 (M8) to ø20 (M16) |
 |
Hex Nut - Stainless Steel A4 |
ø6 (M4.5) to ø12 (M10) |
 |
Hookbolt - Zinc Plated |
ø8 (M6) |
 |
Eyebolt - Zinc Plated |
ø8 (M6) |
 |
Tie Wire Head - Zinc Plated |
ø8 (M6) to ø12 (M10) |
EcBolt Sleeve Anchors
Product Advantages
| > |
Through fixing - No marking out and repositioning |
| > |
Fully assembled |
| > |
Integral nut and washer |
Applications
| > |
Services - duct work, pipe brackets, cable trays |
| > |
Metal Works - sign, handrail and gates |
| > |
Suspended ceilings bracket fixing |
| > |
Drywall track fixing |
| > |
Fastening light to medium weight equipment |
| > |
Bottom plate and batten fixing |
| > |
Drill the correct diameter hole and depth. Clean hole thoroughly with brush and remove debris from hole by blowing out with compressed air or hand held blow out pump. |
| > |
Insert anchor through fixture and tap in until washer contacts fixture. |
| > |
Tighten bolt with a torque wrench to the recommended tightening torque. |
Product Range
| |
Type |
Sizes |
 |
Hex Nut - Zinc Plated |
M5 to M16 |
|
|
Product pages - Sleeve Anchors.pdf