Undercut Technology
KEIL Undercut Anchor
 
 
   
 
 
The KEIL undercut anchor, for invisible attachment of thin panels, is manufactured from stainless steel. Its geometry, matched to the KEIL undercut hole, applies maximum loads to the panels in an optimum manner. This geometry ensures stress-free attachment in all commonly used panel materials from 6mm thick. Depending on panel thickness or carrying capacity required, different insertion depths are available. The KEIL undercut anchor is designed in such a way that it withstands a greater load than just the weight of the panel.
 
 
The KEIL arguments
> Highest safety due to many patents and approvals, for example the European Technical Approval (ETA) for the attachment of facade panels.
> A complete system – technically mature and proven innumerable times.
> Facade panels as thin as 6 mm – economic and saving resources.
> Installation independent of temperature and climate with a high degree of pre-assembly in the factory or on site.
> Position of undercut anchor on the back of the panel can be selected without constraints. 
> Tolerances in panel thickness are simply compensated for by means of spacers. 
> Earthquake tested up to magnitude 9.4 on the open-ended Richter scale.
> Very high load capacity due to optimum load application, but without stressing the facade panel by lateral bracing = positive fit. 
> Breakage loads are up to seven times higher than for edge attachment (e.g. bolt anchors). 
> Subsequent replacement of individual or all facade panels.
> Non-flammable, mechanical and permanently safe attachment.
 
 
The KEIL undercut hole
 
 
 
 
The KEIL undercut drilling systems
 
 
  
 
 
Drilling and Undercutting
 
  
 
Assembly
 
 
 
 
Product Range
  KH AA
Facade thick
6-18mm
Anchor depth
4-15mm
  KH BH     
Facade thick
9.5-18mm
Anchor depth
7-15mm
  Diamond tipped facade drill bit

Depth control guide
 


萬 斯 美 有 限 公 司
MCM CONSTRUCTION MATERIALS SUPPLY COMPANY LIMITED
 
香港新界元朗大旗嶺733號
733 TAI KEI LENG, YUEN LONG, N.T. , HONG KONG
Tel:  +852 2443 1222
Fax: +852 2443 7000
sales@mcmhk.com
 
 
香港維修及服務中心
Tool Service Depot
 
香港新界元朗大旗嶺733號
(大棠路加德士油站對面)
733 TAI KEI LENG, YUEN LONG, N.T. , HONG KONG
Tel:  +852 2443 1222
Fax: +852 2443 7000
sales@mcmhk.com
 
 
澳門服務中心
Macau Service Centre
 
萬斯美建材(澳門)有限公司
MCM CONSTRUCTION MATERIALS (MACAU) LTD.
 
澳門青洲河邊馬路1126號瑞祥新村地下A座
Tel:  +853 2827 1348
macau@mcmhk.com